
PRODUCT DATASHEET
4635 Boston Lane
Phone: 512-382-8100
MKTG-DOC-00116
A01
Austin, TX 78735
www.nuventix.com
Revision
Oct 2011
SynJet
XFlow 30 High Performance Cooler
SynJet cooling technology provides the most reliable thermal
management solution available. This cooler has been developed
by Nuventix as a general purpose cooling solution for ICs such as
FPGAs, microprocessors, and ASICs as well as LED cooling.
Cools up to 40 W
4
Reliable 100K Hours Lifetime
Energy Efficient
Specifications
Thermal & Acoustic
SynJet Setting
Θs-a
TDP
SPL (dBA)
(W)
Wire Connections
High Performance
1.1
40
38
Red to +VDC
Black to Ground
PWM at 100% duty cycle
Red to +VDC
Black to Ground
Blue to PWM Signal
Electrical
SynJet Setting
2
Voltage
(VDC)
+/- 10%
Current (mA)
Pavg
(W)
Voltage
(VDC)
+/- 10%
Current (mA)
6
Pavg
(W)
Imin
Iavg
Ipeak
Imin
Iavg
Ipeak
High Performance
5
20
240
480
1.2
12
10
117
234
1.4
PWM at 100% duty cycle
Environmental
All Settings
Min
Max
Units
Conditions
Operating Temperature
-40
75
°C
Air temperature surrounding cooler
Storage Temperature
-50
95
°C
Air temperature surrounding cooler
Storage Altitude
15K
m
Above sea level
Operating Relative Humidity
5
95
%
Non-condensing
Weight
61
g
SynJet only with heat sink
Reliability
100K
hrs
L10 @ 60
°C
Regulatory Compliance
RoHS, UL, FCC Part 15 Class B, CE
1 All values are typical at 25C unless otherwise stated.
2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings.
3 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom
middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 15cm
2 using the reference heat sink. Actual thermal
performance may vary by application and final product design should be tested to assure proper thermal performance.
4 Thermal Design Power is based on a 44C temperature rise of heat sink mounting surface above ambient temperature around cooler.
5 Sound Pressure Level is measured at 1 meter distance per ISO 7779.
6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption
(Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation.
5 yr Warranty
Small Form Factor
75
°C Operating ambient